Difference between revisions of "Compile opencv with cuda support"

From Simon's Help System
Jump to navigation Jump to search
Line 16: Line 16:
sudo ./jetson-containers/packages/opencv/opencv_install.sh https://nvidia.box.com/shared/static/ngp26xb9hb7dqbu6pbs7cs9flztmqwg0.gz OpenCV-4.8.1-aarch64.tar.gz</pre>
sudo ./jetson-containers/packages/opencv/opencv_install.sh https://nvidia.box.com/shared/static/ngp26xb9hb7dqbu6pbs7cs9flztmqwg0.gz OpenCV-4.8.1-aarch64.tar.gz</pre>


 
Run JTOP and you should see
Explanation:
Since both variables, weight and nms_iou_threshold, are templated and finally boil down to a primitive type during compilation, it is meaningful to use a static_cast to convert the respective constant (1.0 (by default double) and 0 (by default int)) to the template type. Based on the operator candidates the required types should all be compatible, i.e., the constant values are safe to be casted to the target template type.

Revision as of 17:46, 19 April 2024

Install JTOP 

sudo apt install python3-pip

After pip installs: 

sudo pip3 install -U jetson-stats

Install jetson containers 

# install the container tools
git clone https://github.com/dusty-nv/jetson-containers
bash jetson-containers/install.sh

Then staying in the home directory 

sudo ./jetson-containers/packages/opencv/opencv_install.sh https://nvidia.box.com/shared/static/ngp26xb9hb7dqbu6pbs7cs9flztmqwg0.gz OpenCV-4.8.1-aarch64.tar.gz

Run JTOP and you should see

Retrieved from "https://wiki.bunnfamily.nz/index.php?title=Compile_opencv_with_cuda_support&oldid=102"